Package: cdebootstrap-udeb
Priority: optional
Section: debian-installer
Installed-Size: 140
Maintainer: Bastian Blank <waldi@debian.org>
Architecture: hppa
Source: cdebootstrap
Version: 0.3.10bpo1
Depends: libc6 (>= 2.3.2.ds1-21), libdebconfclient0, libdebian-installer-extra4 (>= 0.29), libdebian-installer4 (>= 0.29)
Filename: pool/main/c/cdebootstrap/cdebootstrap-udeb_0.3.10bpo1_hppa.udeb
Size: 19870
MD5sum: af12ec6251c8b1d6d97df8858c1b4185
SHA1: e2d1f0a6bf41481c2dc18ef7cf8b9428e78f186f
SHA256: d4f72bad66596bf5671981ba5d074e9b30c388fe9eeca27502fa6757ea4a18d4
Description: Bootstrap a Debian system
 cdebootstrap is used to create a Debian base system from scratch.

Package: cryptsetup-udeb
Priority: optional
Section: debian-installer
Installed-Size: 452
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: hppa
Source: cryptsetup
Version: 2:1.0.3-2bpo1
Depends: libc6 (>= 2.3.2.ds1-21), libdevmapper1.01, libpopt0 (>= 1.7), libuuid1, dmsetup-udeb
Filename: pool/main/c/cryptsetup/cryptsetup-udeb_1.0.3-2bpo1_hppa.udeb
Size: 201712
MD5sum: ca563d7c1a99a5c02e36311ad0c45338
SHA1: 7bad60b64e6a0e27d2540c88ef016095bf766ec4
SHA256: 4006e5b3faba7c53f76a947088f4a83b2be5ba28d53381620a465ea33cbca78f
Description: configures encrypted block devices
 Since kernel 2.6.4, encrypted filesystem support is provided by the device
 mapper target dm-crypt. This utility provides a command-line interface for
 configuring this facility. It has integrated support for LUKS.
 .
 cryptsetup is backwards compatible with the on-disk format of cryptoloop,
 but also supports more secure formats. This package also includes support
 for automatically configuring encrypted devices at boot time via the config
 file /etc/crypttab. When combined with newer versions of the debian
 initrd-tools and standard debian kernels, cryptoroot is also supported.

Package: debian-archive-keyring-udeb
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Michael Vogt <mvo@debian.org>
Architecture: all
Source: debian-archive-keyring
Version: 2006.11.22~bpo.2
Recommends: gpgv-udeb
Filename: pool/main/d/debian-archive-keyring/debian-archive-keyring-udeb_2006.11.22~bpo.2_all.udeb
Size: 7230
MD5sum: d087231ba12ab805404846e6171405e6
SHA1: b1482dcf9756fb907622a3efd38d5acd69d5ba5b
SHA256: 12b81a25174f15bc3616458c2b619afe4298111a4d81aa86993f0acc9c9d86ec
Description: GnuPG keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that, in a minimal form for use
 in the installer.

Package: debootstrap-udeb
Priority: required
Section: debian-installer
Installed-Size: 164
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: hppa
Source: debootstrap
Version: 0.3.3~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), mounted-partitions
Filename: pool/main/d/debootstrap/debootstrap-udeb_0.3.3~bpo.1_hppa.udeb
Size: 36768
MD5sum: 1ac5ee70131d68e0f45fd8a836e246c3
SHA1: 282fd0fce43e91b4554da63a75001f9d54fd32a3
SHA256: 515d206c9ab9226232c8214953e90b55a20724a7aa53117445090b94e4cbc399
Description: Bootstrap the Debian system
 debootstrap is used to create a Debian base system from scratch,
 without requiring the availability of dpkg or apt. It does this by
 downloading .deb files from a mirror site, and carefully unpacking them
 into a directory which can eventually be chrooted into.
 .
 debootstrap-udeb is a minimal package used by debian-installer.

Package: discover1-data-udeb
Priority: extra
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Source: discover1-data
Version: 1.2006.01.14~bpo.1
Filename: pool/main/d/discover1-data/discover1-data-udeb_1.2006.01.14~bpo.1_all.udeb
Size: 18012
MD5sum: e1442e407cb71424010f60720fc37f68
SHA1: 2ba73f3304bb245e2075f2dd26b218ff0945bc47
SHA256: d3a7e51e4987d4ca2a210259f33e19ccd5ad53af58535c8a6fc51157ff45fbd0
Description: hardware lists for libdiscover1 (short list)
 The libdiscover1 library requires this package to look up information about
 various hardware devices using the identification data that they report.  It
 contains data detailing various PCI, PCMCIA, and USB devices.
 .
 There are two separate lists for kernel versions 2.4 and 2.6. Discover
 automatically chooses the appropriate list for your running kernel.
 .
 This is the short list of HW required by d-i during installation.

Package: discover1-udeb
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: hppa
Source: discover1
Version: 1.7.18~bpo.1
Provides: discover
Depends: libc6 (>= 2.3.2.ds1-21), libdiscover1, discover1-data-udeb (>= 1.2004.09.24)
Filename: pool/main/d/discover1/discover1-udeb_1.7.18~bpo.1_hppa.udeb
Size: 8110
MD5sum: 73317a95d1d5c5da6eaabe875daaab45
SHA1: 52589cfd06cf6e7d67c91a40534a09f754add8da
SHA256: a8f514c9896e0ce19dc1a0e8b679720c0e560fe78f6ac0435b5328475d1adb6f
Description: hardware identification system (udeb)

Package: e2fsprogs-udeb
Priority: optional
Section: debian-installer
Installed-Size: 472
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: hppa
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1
Depends: libblkid1-udeb, libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/e/e2fsprogs/e2fsprogs-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_hppa.udeb
Size: 200046
MD5sum: 57506be4797211a9eca295484f446ee4
SHA1: 720879e7ee6c812e1eebdc63feb6f0b1d6090e4e
SHA256: 633aa5d9b71c978973108ac33653a68ae17a3c1ae3dc938e73fa11e2d1ecdcc0
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: gnupg-udeb
Priority: extra
Section: debian-installer
Installed-Size: 844
Maintainer: James Troup <james@nocrew.org>
Architecture: hppa
Source: gnupg
Version: 1.4.6-1~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), libusb-0.1-4 (>= 2:0.1.10a), zlib1g (>= 1:1.2.1)
Filename: pool/main/g/gnupg/gnupg-udeb_1.4.6-1~bpo.1_hppa.udeb
Size: 417320
MD5sum: c29b4ce85666bc7e05fefec7ade0944e
SHA1: 1b60b324b8514b3186745cc3efcfd62b16c9b285
SHA256: 9f812fd8c223e469004ded4bae6870a971eb1f7fd8f34d1641c4143b070d8bd0
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC2440.
 .
 This is GnuPG packaged in minimal form for use in debian-installer.

Package: gpgv-udeb
Priority: extra
Section: debian-installer
Installed-Size: 324
Maintainer: James Troup <james@nocrew.org>
Architecture: hppa
Source: gnupg
Version: 1.4.6-1~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), zlib1g (>= 1:1.2.1)
Filename: pool/main/g/gnupg/gpgv-udeb_1.4.6-1~bpo.1_hppa.udeb
Size: 151588
MD5sum: acfb4ba63d34d9ccbc7d59521606ceef
SHA1: f270f5d4f93cd61e0abd5d9d812f5f9981bde474
SHA256: 5e8694f310d4f9b4bc8a70d35630b0632e4584e96d619a04430752a74d125449
Description: minimal signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC2440.
 .
 This is GnuPG's signature verification tool, gpgv, packaged in minimal
 form for use in debian-installer.

Package: libblkid1-udeb
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: hppa
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1
Provides: libblkid1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/e/e2fsprogs/libblkid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_hppa.udeb
Size: 18328
MD5sum: 80eacb543522057c7cc89951b182f756
SHA1: 58f0dfc599aa5745f45d38eeb24b1f15886f7fca
SHA256: d15c8d4e72a51ef0941c27ea1c7f4bc0ee2948a1b4709d739063062a78cd6d08
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libdirectfb-0.9-24-udeb
Priority: optional
Section: debian-installer
Installed-Size: 1144
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: hppa
Source: directfb
Version: 0.9.24-3bpo1
Provides: libdirectfb-0.9-24
Depends: libc6 (>= 2.3.2.ds1-21), libdirectfb-0.9-24, libfreetype6 (>= 2.1.5-1), libpng12-0 (>= 1.2.8rel), libsysfs1, zlib1g (>= 1:1.2.1)
Filename: pool/main/d/directfb/libdirectfb-0.9-24-udeb_0.9.24-3bpo1_hppa.udeb
Size: 488614
MD5sum: 958d3a2731a898b3f6d9b87f3a59cc5f
SHA1: 3ad17b01837acf4b6c30c23a7fd6e2a9107e13b4
SHA256: 1c1ce791029e4978f08ba2e22ac65501a4161fb2b38ae08e050e49951a608775
Description: frame buffer graphics library
 DirectFB is a graphics library which was designed with embedded systems
 in mind. It offers maximum hardware accelerated performance at a minimum
 of resource usage and overhead.
 .
 This package contains the shared libraries for use with the debian
 installer.

Package: libdiscover1-udeb
Priority: extra
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: hppa
Source: discover1
Version: 1.7.18~bpo.1
Provides: libdiscover1
Depends: libc6 (>= 2.3.2.ds1-21), discover1-data-udeb (>= 1.2004.09.24)
Filename: pool/main/d/discover1/libdiscover1-udeb_1.7.18~bpo.1_hppa.udeb
Size: 34906
MD5sum: e685adb109d82e7c36c8a4a5a275ecbb
SHA1: eb9617238390598a65284d1cb13a407c7f38cb62
SHA256: 69748b333adf38cbba5fbe062f5c0699279e7068673b7254f9421dc05a47736c
Description: hardware identification library (udeb)

Package: libglib2.0-udeb
Priority: extra
Section: debian-installer
Installed-Size: 3052
Maintainer: Sebastien Bacher <seb128@debian.org>
Architecture: hppa
Source: glib2.0
Version: 2.10.2-0bpo1
Provides: libglib2.0-0
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/g/glib2.0/libglib2.0-udeb_2.10.2-0bpo1_hppa.udeb
Size: 611422
MD5sum: d1fbe815cb093a8ecf90108c47a048f5
SHA1: 1cb14cb5c2f2111b5ac1fbe6204d63cca5479135
SHA256: eac3d7ad7c835e5cf3b9b33f9c14a831030350d5d19f9ef92a38cd93fd65f772
Description: The GLib library of C routines
 This is a udeb, or a microdeb, for the debian-installer.
 .
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.

Package: libiw28-udeb
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: hppa
Source: wireless-tools
Version: 28-1~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/w/wireless-tools/libiw28-udeb_28-1~bpo.1_hppa.udeb
Size: 14870
MD5sum: d6569eb3c96b28f14f00f28ffec5406e
SHA1: fdff910ef23da37cc37c2e620f05fa2415c6ba7a
SHA256: cc16d828582ab9da6ee334e9c12a496007e3d6bdfefaa8cd98edbf855f04c1dd
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate the Linux
 Wireless Extensions. The Wireless Extension is an interface allowing you to
 set Wireless LAN specific parameters and get the specific stats.
 .
 This is a udeb of the wireless tools.

Package: libparted1.7-udeb
Priority: extra
Section: debian-installer
Installed-Size: 508
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Architecture: hppa
Source: parted
Version: 1.7.1-2.1~bpo.1
Provides: libparted1.7-1
Depends: libc6 (>= 2.3.2.ds1-21), libuuid1
Filename: pool/main/p/parted/libparted1.7-udeb_1.7.1-2.1~bpo.1_hppa.udeb
Size: 210502
MD5sum: 1ac5dc8120b88b7f1133170f7cab3f49
SHA1: 798027f225c97e7962be391860fbddbcdd0e5c09
SHA256: 9b9e5e844b3b4cdd81dfbac8913695364c22439c05d02273bd65cd268c81a9e4
Description: The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: libslang2-udeb
Priority: extra
Section: debian-installer
Installed-Size: 844
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: hppa
Source: slang2
Version: 2.0.6-3~bpo.2
Depends: libc-udeb
Filename: pool/main/s/slang2/libslang2-udeb_2.0.6-3~bpo.2_hppa.udeb
Size: 311474
MD5sum: ad8bbc8c3377db8d77ff3bab4ae6f99b
SHA1: 35ef03452fea0b9ad17d30f254b4e69f3c67d5df
SHA256: ec03c8ba2ebcb06ea78521c62483e1e0327337867366bdb6897b6679d2aec892
Description: S-Lang library for Debian Installer
 This is a udeb, or a microdeb, of the S-Lang library with wide charater
 support. As such it is the installer counterpart of libslang2.
 You only need this package to support applications needing S-Lang during
 the Debian installation process time and probably don't need to select it.

Package: libsysfs2-udeb
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Martin Pitt <mpitt@debian.org>
Architecture: hppa
Source: sysfsutils
Version: 2.0.0-6bpo1
Provides: libsysfs2
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/s/sysfsutils/libsysfs2-udeb_2.0.0-6bpo1_hppa.udeb
Size: 15794
MD5sum: 5b59e2a364475afffaed1260eab19521
SHA1: dda8bf13a85211cbe318c8581b61a365f2c4499a
SHA256: ebc067c37253d99964165fdb257334c15e6b4ae4c5af295ad22bb66db5890e1e
Description: interface library to sysfs
 Sysfs is a virtual file system in Linux kernel 2.5+ that provides a
 tree of system devices. libsysfs provides a stable programming
 interface to sysfs and eases querying system devices and their
 attributes.
 .
 This is a minimal package for use in debian-installer.

Package: libuuid1-udeb
Priority: optional
Section: debian-installer
Installed-Size: 28
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: hppa
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1
Replaces: libuuid1
Provides: libuuid1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/e/e2fsprogs/libuuid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_hppa.udeb
Size: 8284
MD5sum: bb60cc2efbdcb8d38f6b377e911c551d
SHA1: 3b21dc32ba089395c20e6eaac9a41c0954f66eaf
SHA256: 4bd64eef7283138ffd63474a47451c7c036b27d1296443865f52583e4db8ac85
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's),
 using a standard which is blessed by both Microsoft and DCE, and is
 being proposed as an internet standard.  See the internet-draft:
 .
                draft-leach-uuids-guids-01.txt
 .
 for more information.
 .
 This is a minimal package for debian-installer.

Package: mdadm-udeb
Priority: optional
Section: debian-installer
Installed-Size: 172
Maintainer: Debian/Ubuntu mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Architecture: hppa
Source: mdadm
Version: 2.4.1-5bpo1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/m/mdadm/mdadm-udeb_2.4.1-5bpo1_hppa.udeb
Size: 74862
MD5sum: a1e3bad2ce59928243eb771e6b70c9fb
SHA1: c43ab02b70ba5a5e22c5903969571453c8cd7850
SHA256: 4c071283d21097adb3eb66bad593ecc92c1aeda449e1ee46d493d3567213fd18
Description: tool to administer Linux MD device arrays (software RAID)
 mdadm is a program that can be used to create, manage, and monitor MD
 devices (software RAID), as well as multipath devices.
 .
 mdadm-udeb is a minimal package used by the debian-installer.

Package: module-init-tools-udeb
Priority: extra
Section: debian-installer
Installed-Size: 124
Maintainer: Marco d'Itri <md@linux.it>
Architecture: hppa
Source: module-init-tools
Version: 3.3-pre4-1~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/m/module-init-tools/module-init-tools-udeb_3.3-pre4-1~bpo.1_hppa.udeb
Size: 37858
MD5sum: d13b39f85d80b1b7f7a0880e89c9be81
SHA1: 90820ed46378b2b37a6a2a3d3e8deac29a486a3c
SHA256: 63ef790afb58f949b5924dbe5bb4d250b6f2208a78350e70ad691f9a48e50092
Description: tools for managing Linux kernel modules
 This is the debian-installer version of module-init-tools.

Package: openssh-client-udeb
Priority: optional
Section: debian-installer
Installed-Size: 420
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: hppa
Source: openssh
Version: 1:4.3p2-5~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb
Filename: pool/main/o/openssh/openssh-client-udeb_4.3p2-5~bpo.1_hppa.udeb
Size: 189744
MD5sum: b9804b2775ce56b204c16f6f8311b155
SHA1: fcbc97b9ef82d73910a910edac9abb5a3980e6d7
SHA256: 958e12e09ed375878e3c297968b9a86bf3ecce17efc85daa6b059d8528a9b7d8
Description: Secure shell client for the Debian installer
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 This package provides the ssh client for use in debian-installer.
installer-menu-item: 999

Package: openssh-server-udeb
Priority: optional
Section: debian-installer
Installed-Size: 448
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: hppa
Source: openssh
Version: 1:4.3p2-5~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb
Filename: pool/main/o/openssh/openssh-server-udeb_4.3p2-5~bpo.1_hppa.udeb
Size: 196844
MD5sum: e69af7e04983c28aaa29109fbe095ae5
SHA1: 5d443d263cf4f9456074a17934c55357c033c440
SHA256: 01d61322737b92d9387f6af28ab558580ab8b32e6265bdda2f14d493e82b878c
Description: Secure shell server for the Debian installer
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 This package provides the sshd server for use in debian-installer.
 Since it is expected to be used in specialized situations (e.g. S/390
 installs with no console), it does not provide any configuration.

Package: parted-udeb
Priority: extra
Section: debian-installer
Installed-Size: 80
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Architecture: hppa
Source: parted
Version: 1.7.1-2.1~bpo.1
Provides: parted
Depends: libc6 (>= 2.3.2.ds1-21), libparted1.7-1 (>= 1.7.1-1)
Filename: pool/main/p/parted/parted-udeb_1.7.1-2.1~bpo.1_hppa.udeb
Size: 30740
MD5sum: eb5b957a9775ff7f9741750ea4f9850c
SHA1: ff68c75c547aadc9b495f435737fb356f6e82c7c
SHA256: 1277c550da1a28f61bae35cecccc068a2db64497054efa81d0d4c552a5921dd6
Description: The GNU Parted disk partition resizing program
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package is similar to the "big" parted package, but has
 less cosmetical features resulting in smaller binary. Intended
 to be used in debian-installer.
 .
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: pcmciautils-udeb
Priority: extra
Section: debian-installer
Installed-Size: 112
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: hppa
Source: pcmciautils
Version: 013-0bpo1
Depends: udev-udeb, libc6 (>= 2.3.2.ds1-21), libsysfs2
Filename: pool/main/p/pcmciautils/pcmciautils-udeb_013-0bpo1_hppa.udeb
Size: 22838
MD5sum: 603cdede30383bb6d5a087f34b96a890
SHA1: 43afd56e191fc1aa79467f3eb4d612efa0094beb
SHA256: 44534cf0ddf74cf01da77060864cf1890ac5fb1953032c91fb14ec6e087f7045
Description: PCMCIA utilities for Linux 2.6
 This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or
 later, replacing the old pcmcia-cs tools used with earlier kernel versions.
 PCMCIA cards are commonly used in laptops to provide expanded capabilities
 such as network connections, modems, increased memory, etc.
 .
 To use PCMCIA you need to have kernel modules available to support it.
 These are included in the stock Debian 2.6 kernel packages.
 .
 This is a minimal package for use in debian-installer.

Package: ppp-udeb
Priority: optional
Section: debian-installer
Installed-Size: 340
Maintainer: Marco d'Itri <md@linux.it>
Architecture: hppa
Source: ppp
Version: 2.4.4rel-1bpo1
Provides: configured-network
Depends: libc6 (>= 2.3.2.ds1-21), ethernet-card-detection, ppp-modules, di-utils
Filename: pool/main/p/ppp/ppp-udeb_2.4.4rel-1bpo1_hppa.udeb
Size: 125754
MD5sum: 0e09e6a3c85c64bd836a48389aed38f6
SHA1: 82864094a97f4bb627bef7d624d466e429b156f6
SHA256: bdb8178e0788fadfd211363dce4cabca6e2a7f8150f3ff90be430b19f5c287cd
Description: Point-to-Point Protocol (PPP) daemon
 The Point-to-Point Protocol (PPP) provides a standard way to transmit
 datagrams over a serial link, as well as a standard way for the machines
 at either end of the link (the "peers") to negotiate various optional
 characteristics of the link.  Using PPP, a serial link can be used to
 transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections
 between the peers.
 .
 ppp-udeb is a minimal ppp package used by the debian-installer.
installer-menu-item: 18

Package: ttf-dejavu-udeb
Priority: optional
Section: debian-installer
Installed-Size: 636
Maintainer: Peter Cernak <pce@users.sourceforge.net>
Architecture: all
Source: ttf-dejavu
Version: 2.7-1bpo1
Filename: pool/main/t/ttf-dejavu/ttf-dejavu-udeb_2.7-1bpo1_all.udeb
Size: 328828
MD5sum: be72588f30e96dc2cd6bf8e7800fbf30
SHA1: 6ed1f0565711bb3dc127d0abcb42368b07d672e6
SHA256: 9cb6b280cbc3f67af44511f5f45c24272881649e521723a5c015789d0f6336a7
Description: Bitstream Vera fonts with additional characters for D-I use
 These fonts are based on the famous Bitstream Vera font family adding better
 support for non-English languages. They currently cover the entire Latin
 Ext-A range and parts of Latin Ext-B, Cyrillic, Greek and other ranges.
 .
 This package provides the fonts for use with the gtk frontend of
 debian-installer.

Package: udev-udeb
Priority: optional
Section: debian-installer
Installed-Size: 448
Maintainer: Marco d'Itri <md@linux.it>
Architecture: hppa
Source: udev
Version: 0.105-4~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/u/udev/udev-udeb_0.105-4~bpo.1_hppa.udeb
Size: 127112
MD5sum: 82be8bb3d361ec7c0f7e142eb9e84e29
SHA1: a3343966dca1ebf7c4638f1d79df0519a0e5f1b6
SHA256: 5da600dde45359a8d318308292eb795d69afc489452c10c4555388c14ee12044
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time. It replaces
 the hotplug package and requires a kernel not older than 2.6.12.
 .
 This is a minimal version for use in debian-installer.

Package: wireless-tools-udeb
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: hppa
Source: wireless-tools
Version: 28-1~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), libiw28 (>= 28)
Filename: pool/main/w/wireless-tools/wireless-tools-udeb_28-1~bpo.1_hppa.udeb
Size: 13320
MD5sum: 0e3507bd0c432d7a74e0bef4546d662b
SHA1: ee840af737a7e8a61527857312a3e03b87967c74
SHA256: a2109332f9c705aaec217c50ca0da90ed9e31f61efe10619ffbfe426c7315a87
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate the Linux
 Wireless Extensions. The Wireless Extension is an interface allowing you to
 set Wireless LAN specific parameters and get the specific stats.
 .
 This is a udeb of the wireless tools.