Package: cdebootstrap-udeb
Priority: optional
Section: debian-installer
Installed-Size: 152
Maintainer: Bastian Blank <waldi@debian.org>
Architecture: alpha
Source: cdebootstrap
Version: 0.3.10bpo1
Depends: libc6.1 (>= 2.3.2.ds1-21), libdebconfclient0, libdebian-installer-extra4 (>= 0.29), libdebian-installer4 (>= 0.29)
Filename: pool/main/c/cdebootstrap/cdebootstrap-udeb_0.3.10bpo1_alpha.udeb
Size: 23258
MD5sum: 60390f78be436f3fd00090ebbe3b51ae
SHA1: e8194cec01f28e2f1d786d0d033763f00153024a
SHA256: cea74b8629eb3868abef366aeb59f3a200cded919cc7d8eb859a6c217665802b
Description: Bootstrap a Debian system
cdebootstrap is used to create a Debian base system from scratch.
Package: cryptsetup-udeb
Priority: optional
Section: debian-installer
Installed-Size: 548
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: alpha
Source: cryptsetup
Version: 2:1.0.3-2bpo1
Depends: libc6.1 (>= 2.3.2.ds1-21), libdevmapper1.01, libpopt0 (>= 1.7), libuuid1, dmsetup-udeb
Filename: pool/main/c/cryptsetup/cryptsetup-udeb_1.0.3-2bpo1_alpha.udeb
Size: 231460
MD5sum: dd83f71583f20f4b53410c9e76fb50ac
SHA1: ed081b56a9fec0701c4d2afacae29331e205451b
SHA256: abbdddfd0574386bc2ba330c995dfde2760bf4ea31a8f0f3f407785927b33ee8
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debian-archive-keyring-udeb
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Michael Vogt <mvo@debian.org>
Architecture: all
Source: debian-archive-keyring
Version: 2006.11.22~bpo.2
Recommends: gpgv-udeb
Filename: pool/main/d/debian-archive-keyring/debian-archive-keyring-udeb_2006.11.22~bpo.2_all.udeb
Size: 7230
MD5sum: d087231ba12ab805404846e6171405e6
SHA1: b1482dcf9756fb907622a3efd38d5acd69d5ba5b
SHA256: 12b81a25174f15bc3616458c2b619afe4298111a4d81aa86993f0acc9c9d86ec
Description: GnuPG keys of the Debian archive
The Debian project digitally signs its Release files. This package
contains the archive keys used for that, in a minimal form for use
in the installer.
Package: debootstrap-udeb
Priority: required
Section: debian-installer
Installed-Size: 180
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: alpha
Source: debootstrap
Version: 0.3.3~bpo.1
Depends: libc6.1 (>= 2.3.2.ds1-21), mounted-partitions
Filename: pool/main/d/debootstrap/debootstrap-udeb_0.3.3~bpo.1_alpha.udeb
Size: 44100
MD5sum: df784d68a279a1e5663193b3a7500031
SHA1: 28378c20f5e6a5e612108ffb0f94381d3e04b671
SHA256: 0937224e32002ed2d79ef1b123199c3f9e62e6059a666f93510f35304145a153
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: discover1-data-udeb
Priority: extra
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Source: discover1-data
Version: 1.2006.01.14~bpo.1
Filename: pool/main/d/discover1-data/discover1-data-udeb_1.2006.01.14~bpo.1_all.udeb
Size: 18012
MD5sum: e1442e407cb71424010f60720fc37f68
SHA1: 2ba73f3304bb245e2075f2dd26b218ff0945bc47
SHA256: d3a7e51e4987d4ca2a210259f33e19ccd5ad53af58535c8a6fc51157ff45fbd0
Description: hardware lists for libdiscover1 (short list)
The libdiscover1 library requires this package to look up information about
various hardware devices using the identification data that they report. It
contains data detailing various PCI, PCMCIA, and USB devices.
.
There are two separate lists for kernel versions 2.4 and 2.6. Discover
automatically chooses the appropriate list for your running kernel.
.
This is the short list of HW required by d-i during installation.
Package: discover1-udeb
Priority: extra
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: alpha
Source: discover1
Version: 1.7.18~bpo.1
Provides: discover
Depends: libc6.1 (>= 2.3.2.ds1-21), libdiscover1, discover1-data-udeb (>= 1.2004.09.24)
Filename: pool/main/d/discover1/discover1-udeb_1.7.18~bpo.1_alpha.udeb
Size: 8132
MD5sum: a2f376d7e20a2afd181d17f4d56ee2bd
SHA1: f127aefd54b7647a4de3bc4f4e4b7b2c4009e170
SHA256: c574c0c2c8cfc7fa31886dec4617cd62ee7ac1e5ac7c9cf3136601180e67744c
Description: hardware identification system (udeb)
Package: e2fsprogs-udeb
Priority: optional
Section: debian-installer
Installed-Size: 560
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: alpha
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1
Depends: libblkid1-udeb, libc6.1 (>= 2.3.2.ds1-21)
Filename: pool/main/e/e2fsprogs/e2fsprogs-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_alpha.udeb
Size: 210450
MD5sum: 9013a7adedef20bd07bbf1a2a388fbf4
SHA1: 1e20fcab59b2c8d26e96cc6668f98df300da7bf9
SHA256: f9d5b6484ffab3016efd4473eb9aae61aa6bc055fccdad016a420f508f4464f4
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: gnupg-udeb
Priority: extra
Section: debian-installer
Installed-Size: 1100
Maintainer: James Troup <james@nocrew.org>
Architecture: alpha
Source: gnupg
Version: 1.4.6-1~bpo.1
Depends: libc6.1 (>= 2.3.2.ds1-21), libusb-0.1-4 (>= 2:0.1.10a), zlib1g (>= 1:1.2.1)
Filename: pool/main/g/gnupg/gnupg-udeb_1.4.6-1~bpo.1_alpha.udeb
Size: 492056
MD5sum: 18b862670a04d8b60b251072384c67f3
SHA1: 669deb3f03ab7a4b292039b1de15c3184e0d766e
SHA256: 62a078e52822979bafb6dc39861403c6bec7c8788dfd728c537f8767cf86fd40
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: gpgv-udeb
Priority: extra
Section: debian-installer
Installed-Size: 424
Maintainer: James Troup <james@nocrew.org>
Architecture: alpha
Source: gnupg
Version: 1.4.6-1~bpo.1
Depends: libc6.1 (>= 2.3.2.ds1-21), zlib1g (>= 1:1.2.1)
Filename: pool/main/g/gnupg/gpgv-udeb_1.4.6-1~bpo.1_alpha.udeb
Size: 182560
MD5sum: c466555f583a34802dded9272db71a5a
SHA1: 74c04bfe71c30f782f9b206b072eeefc6671b3be
SHA256: e814fa510ad86681380acce7f1db3de05dc21fd6f0fdfd6f280c83ddf5091df1
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: libblkid1-udeb
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: alpha
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1
Provides: libblkid1
Depends: libc6.1 (>= 2.3.2.ds1-21)
Filename: pool/main/e/e2fsprogs/libblkid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_alpha.udeb
Size: 18400
MD5sum: c243d72aed2fa3a5893463be208b9fb9
SHA1: 6b95ea03b40b1e747e254798303e866b12998265
SHA256: 6a78a88d48052d6ba34274bc1538370ddd219e09d9eef2a3cc236facf9a1c8a7
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libdirectfb-0.9-24-udeb
Priority: optional
Section: debian-installer
Installed-Size: 1320
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: alpha
Source: directfb
Version: 0.9.24-3bpo1
Provides: libdirectfb-0.9-24
Depends: libc6.1 (>= 2.3.2.ds1-21), libdirectfb-0.9-24, libfreetype6 (>= 2.1.5-1), libpng12-0 (>= 1.2.8rel), libsysfs1, zlib1g (>= 1:1.2.1)
Filename: pool/main/d/directfb/libdirectfb-0.9-24-udeb_0.9.24-3bpo1_alpha.udeb
Size: 535236
MD5sum: 7e025a15ec8b90a2a04b1101a1507e69
SHA1: cdfd74858ca6244386054216bebb4840f4fa0822
SHA256: 2a1b0c480456c97241b7114127193e90b514db933f5bd707be8cf4043651ba1c
Description: frame buffer graphics library
DirectFB is a graphics library which was designed with embedded systems
in mind. It offers maximum hardware accelerated performance at a minimum
of resource usage and overhead.
.
This package contains the shared libraries for use with the debian
installer.
Package: libdiscover1-udeb
Priority: extra
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: alpha
Source: discover1
Version: 1.7.18~bpo.1
Provides: libdiscover1
Depends: libc6.1 (>= 2.3.2.ds1-21), discover1-data-udeb (>= 1.2004.09.24)
Filename: pool/main/d/discover1/libdiscover1-udeb_1.7.18~bpo.1_alpha.udeb
Size: 32634
MD5sum: 4508e04b882cbab8950cff6816a5eda2
SHA1: 2b21dc4725d426dffe9596a65a5679e9888b4548
SHA256: e598779300006c21b36a247bff47cbb9e2252983e08115a67b41c28e3c9195dd
Description: hardware identification library (udeb)
Package: libglib2.0-udeb
Priority: extra
Section: debian-installer
Installed-Size: 3108
Maintainer: Sebastien Bacher <seb128@debian.org>
Architecture: alpha
Source: glib2.0
Version: 2.10.2-0bpo1
Provides: libglib2.0-0
Depends: libc6.1 (>= 2.3.2.ds1-21)
Filename: pool/main/g/glib2.0/libglib2.0-udeb_2.10.2-0bpo1_alpha.udeb
Size: 611684
MD5sum: c2e9454a206ced33d167492e9b301502
SHA1: 67763cb465cec5da07059cc2e09d63643450737f
SHA256: fcbf8cd1a5f9c122598c590460ec22dd78bc63f655c9aefb7193eed29d0d9f4a
Description: The GLib library of C routines
This is a udeb, or a microdeb, for the debian-installer.
.
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
Package: libiw28-udeb
Priority: extra
Section: debian-installer
Installed-Size: 52
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: alpha
Source: wireless-tools
Version: 28-1~bpo.1
Depends: libc6.1 (>= 2.3.2.ds1-21)
Filename: pool/main/w/wireless-tools/libiw28-udeb_28-1~bpo.1_alpha.udeb
Size: 16790
MD5sum: 0780bed1a4be6a2c682163fb6ebbd504
SHA1: d686f76030ab8b5f3b9f04ea7f38c24a1b131b06
SHA256: 456b0fd26c13bb3de60f2e2261911fad05dff1fd4184511f9bd3ff122982f0b9
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.7-udeb
Priority: extra
Section: debian-installer
Installed-Size: 496
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Architecture: alpha
Source: parted
Version: 1.7.1-2.1~bpo.1
Provides: libparted1.7-1
Depends: libc6.1 (>= 2.3.2.ds1-21), libuuid1
Filename: pool/main/p/parted/libparted1.7-udeb_1.7.1-2.1~bpo.1_alpha.udeb
Size: 197828
MD5sum: f0ba340ba27a9b0b5e3ac9f2ac1d4174
SHA1: 7ca77c10edeaa2a7a3d4844e310679936cc9111b
SHA256: ce121ac132ccc455cdc173104ec247f9988e257a6fe9229b59426e48c955de59
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libslang2-udeb
Priority: extra
Section: debian-installer
Installed-Size: 1076
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: alpha
Source: slang2
Version: 2.0.6-3~bpo.2
Depends: libc-udeb
Filename: pool/main/s/slang2/libslang2-udeb_2.0.6-3~bpo.2_alpha.udeb
Size: 314288
MD5sum: 11ff857a4c813ab1df503cc85c24f6b7
SHA1: aedfd0b948159d111b83ad1bc7ab5668b126fdfc
SHA256: f18fe553a1eb7c0312eb532066bfe816b6a5f74ece180e92414176289c3671e8
Description: S-Lang library for Debian Installer
This is a udeb, or a microdeb, of the S-Lang library with wide charater
support. As such it is the installer counterpart of libslang2.
You only need this package to support applications needing S-Lang during
the Debian installation process time and probably don't need to select it.
Package: libsysfs2-udeb
Priority: optional
Section: debian-installer
Installed-Size: 68
Maintainer: Martin Pitt <mpitt@debian.org>
Architecture: alpha
Source: sysfsutils
Version: 2.0.0-6bpo1
Provides: libsysfs2
Depends: libc6.1 (>= 2.3.2.ds1-21)
Filename: pool/main/s/sysfsutils/libsysfs2-udeb_2.0.0-6bpo1_alpha.udeb
Size: 17266
MD5sum: 847c54b34eeb3fc867d882803e9d2106
SHA1: c38a7878e43a69185ed739a5445288736fadb41f
SHA256: 2a407da593f1b1916fa5238fd1ddeeee9a2c8ca8151f80dbf93f9006b74da0d5
Description: interface library to sysfs
Sysfs is a virtual file system in Linux kernel 2.5+ that provides a
tree of system devices. libsysfs provides a stable programming
interface to sysfs and eases querying system devices and their
attributes.
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Priority: optional
Section: debian-installer
Installed-Size: 28
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: alpha
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1
Replaces: libuuid1
Provides: libuuid1
Depends: libc6.1 (>= 2.3.2.ds1-21)
Filename: pool/main/e/e2fsprogs/libuuid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_alpha.udeb
Size: 7120
MD5sum: 377fdcf74197afd10293378f5dd1867e
SHA1: 761ee0eace655df81d3df4266cab8393d6b734e6
SHA256: 4ecb769c2bfcea499d16047bc946a9a14a0383c956ff427e86f9506fbc72bb0e
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: mdadm-udeb
Priority: optional
Section: debian-installer
Installed-Size: 180
Maintainer: Debian/Ubuntu mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Architecture: alpha
Source: mdadm
Version: 2.4.1-5bpo1
Depends: libc6.1 (>= 2.3.2.ds1-21)
Filename: pool/main/m/mdadm/mdadm-udeb_2.4.1-5bpo1_alpha.udeb
Size: 69982
MD5sum: d93cf5020678095c5b1094b9796254b1
SHA1: 01ff41f12de2c3b000e6c93e335c2775583b32de
SHA256: c7bff4325e445f697746fad04a5d9f81e8f7edae5e4190ec52c1afa690dbee99
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: module-init-tools-udeb
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Marco d'Itri <md@linux.it>
Architecture: alpha
Source: module-init-tools
Version: 3.3-pre4-1~bpo.1
Depends: libc6.1 (>= 2.3.2.ds1-21)
Filename: pool/main/m/module-init-tools/module-init-tools-udeb_3.3-pre4-1~bpo.1_alpha.udeb
Size: 41132
MD5sum: 4803d2e5396e2ccb246c46b413253deb
SHA1: 8fd3e0431ec11608dfbacb88e6e4d2075dd9dcb6
SHA256: a714211191d6b1ef2eb283635fa595433f73aeb9dd91bc0825d28dc1608f130c
Description: tools for managing Linux kernel modules
This is the debian-installer version of module-init-tools.
Package: openssh-client-udeb
Priority: optional
Section: debian-installer
Installed-Size: 536
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: alpha
Source: openssh
Version: 1:4.3p2-5~bpo.1
Depends: libc6.1 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb
Filename: pool/main/o/openssh/openssh-client-udeb_4.3p2-5~bpo.1_alpha.udeb
Size: 223230
MD5sum: 124d403f409cdecf25bc92fdcb67d186
SHA1: 421438f9ddd68e8337bd078c1bff110c74e4805d
SHA256: ed7fc9f36a939171b54e6e4c4529407c1813f6f16c1f2ba15340fd656da4c956
Description: Secure shell client for the Debian installer
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
This package provides the ssh client for use in debian-installer.
installer-menu-item: 999
Package: openssh-server-udeb
Priority: optional
Section: debian-installer
Installed-Size: 580
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: alpha
Source: openssh
Version: 1:4.3p2-5~bpo.1
Depends: libc6.1 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb
Filename: pool/main/o/openssh/openssh-server-udeb_4.3p2-5~bpo.1_alpha.udeb
Size: 239418
MD5sum: 9967d8db46ade8e36c1aeb9ca1ea500f
SHA1: 227a7a96b509ee4e38e942b5a8e18f735efea982
SHA256: 5797303f46749cdfa2347db17ff3acde676551ef201d434f09472c01a41e39dd
Description: Secure shell server for the Debian installer
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
This package provides the sshd server for use in debian-installer.
Since it is expected to be used in specialized situations (e.g. S/390
installs with no console), it does not provide any configuration.
Package: parted-udeb
Priority: extra
Section: debian-installer
Installed-Size: 100
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Architecture: alpha
Source: parted
Version: 1.7.1-2.1~bpo.1
Provides: parted
Depends: libc6.1 (>= 2.3.2.ds1-21), libparted1.7-1 (>= 1.7.1-1)
Filename: pool/main/p/parted/parted-udeb_1.7.1-2.1~bpo.1_alpha.udeb
Size: 32330
MD5sum: 59b621b0c1a120330dfe42e0b46d467e
SHA1: 0af0426b9bc4f9b7ad5c075cddfca792e35aecb3
SHA256: 9f321acf4974c4241e3f5a0242cfd2fd4ac3e746b26c5f2f32319ac6c1631ff1
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: pcmciautils-udeb
Priority: extra
Section: debian-installer
Installed-Size: 128
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: alpha
Source: pcmciautils
Version: 013-0bpo1
Depends: udev-udeb, libc6.1 (>= 2.3.2.ds1-21), libsysfs2
Filename: pool/main/p/pcmciautils/pcmciautils-udeb_013-0bpo1_alpha.udeb
Size: 26188
MD5sum: e69474efba19c5180e68261fda4c96f0
SHA1: b641e8d0ce188741cfce96a71bc1f652c76fb23c
SHA256: 7a220d7cb4c0fd78dc4793764b4b589cc34646afd98633a5c438864b36a46fd6
Description: PCMCIA utilities for Linux 2.6
This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or
later, replacing the old pcmcia-cs tools used with earlier kernel versions.
PCMCIA cards are commonly used in laptops to provide expanded capabilities
such as network connections, modems, increased memory, etc.
.
To use PCMCIA you need to have kernel modules available to support it.
These are included in the stock Debian 2.6 kernel packages.
.
This is a minimal package for use in debian-installer.
Package: ppp-udeb
Priority: optional
Section: debian-installer
Installed-Size: 420
Maintainer: Marco d'Itri <md@linux.it>
Architecture: alpha
Source: ppp
Version: 2.4.4rel-1bpo1
Provides: configured-network
Depends: libc6.1 (>= 2.3.2.ds1-21), ethernet-card-detection, ppp-modules, di-utils
Filename: pool/main/p/ppp/ppp-udeb_2.4.4rel-1bpo1_alpha.udeb
Size: 153192
MD5sum: 4fc7c75f0b48879322f6c8a0cd7aec67
SHA1: ca3f9b70263aab19eef8375b26a1811dc73aff7b
SHA256: aca1962f9e7abc12b622b1aa1d9e69b8e2b4ade81f0f5d3b6a9239f1bc635ce6
Description: Point-to-Point Protocol (PPP) daemon
The Point-to-Point Protocol (PPP) provides a standard way to transmit
datagrams over a serial link, as well as a standard way for the machines
at either end of the link (the "peers") to negotiate various optional
characteristics of the link. Using PPP, a serial link can be used to
transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections
between the peers.
.
ppp-udeb is a minimal ppp package used by the debian-installer.
installer-menu-item: 18
Package: ttf-dejavu-udeb
Priority: optional
Section: debian-installer
Installed-Size: 636
Maintainer: Peter Cernak <pce@users.sourceforge.net>
Architecture: all
Source: ttf-dejavu
Version: 2.7-1bpo1
Filename: pool/main/t/ttf-dejavu/ttf-dejavu-udeb_2.7-1bpo1_all.udeb
Size: 328828
MD5sum: be72588f30e96dc2cd6bf8e7800fbf30
SHA1: 6ed1f0565711bb3dc127d0abcb42368b07d672e6
SHA256: 9cb6b280cbc3f67af44511f5f45c24272881649e521723a5c015789d0f6336a7
Description: Bitstream Vera fonts with additional characters for D-I use
These fonts are based on the famous Bitstream Vera font family adding better
support for non-English languages. They currently cover the entire Latin
Ext-A range and parts of Latin Ext-B, Cyrillic, Greek and other ranges.
.
This package provides the fonts for use with the gtk frontend of
debian-installer.
Package: udev-udeb
Priority: optional
Section: debian-installer
Installed-Size: 544
Maintainer: Marco d'Itri <md@linux.it>
Architecture: alpha
Source: udev
Version: 0.105-4~bpo.1
Depends: libc6.1 (>= 2.3.2.ds1-21)
Filename: pool/main/u/udev/udev-udeb_0.105-4~bpo.1_alpha.udeb
Size: 149968
MD5sum: 92b5d839bf27b0c84fbfc7884f7a620a
SHA1: e284adff8f05737a40dbb717ea20689bc16b4fab
SHA256: 4926e3c1cf054ac88d6e0667d3d08a182059faee0155aef567650abc4cb3a162
Description: /dev/ and hotplug management daemon
udev is a daemon which dynamically creates and removes device nodes from
/dev/, handles hotplug events and loads drivers at boot time. It replaces
the hotplug package and requires a kernel not older than 2.6.12.
.
This is a minimal version for use in debian-installer.
Package: wireless-tools-udeb
Priority: extra
Section: debian-installer
Installed-Size: 52
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: alpha
Source: wireless-tools
Version: 28-1~bpo.1
Depends: libc6.1 (>= 2.3.2.ds1-21), libiw28 (>= 28)
Filename: pool/main/w/wireless-tools/wireless-tools-udeb_28-1~bpo.1_alpha.udeb
Size: 14402
MD5sum: 019d31bcd9666aa94bd78c4a6191151c
SHA1: 4be1c761e9eba7de9617b71b19b519c5e60bdcce
SHA256: 871c74aeffb20b81fb683e799f7e09e5b801755de486ead7cd0a2941611cc2b2
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.